MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: AtLarge on November 04, 2021, 02:25:20 PM

Title: Extra leads inside the mirror housing on the fairing
Post by: AtLarge on November 04, 2021, 02:25:20 PM

Just to be sure... the extra wires are for running lights correct?  Can I buy off the shelf jacks that will fit those plugs?  I would rather not cut and splice if I don't have to.  The MAX fiche is acting up for me and I can't even find the explosion for the pods.  Is there a bulb holder part number that I can just replace my original with and use double filament 1157 style bulbs? :idunno:

Title: Re: Extra leads inside the mirror housing on the fairing
Post by: frankenduck on November 04, 2021, 02:35:04 PM

What "extra" wires?

There's no factory part to run 1157 dual filament bulbs.

Run-n-lites Type 3: http://www.run-n-lites.com/AppGuide-Run-n-lites.html

Title: Re: Extra leads inside the mirror housing on the fairing
Post by: AtLarge on November 04, 2021, 04:13:28 PM

Mine:

(http://i.imgur.com/FDVNf5Om.jpg) (https://imgur.com/FDVNf5O)

The black plug is for the turn signal.  I can see the BMW 1369229 and AMP 926569 part number on that but, the white is blank.

Title: Re: Extra leads inside the mirror housing on the fairing
Post by: frankenduck on November 04, 2021, 04:44:32 PM

The white connector is not factory. Only the black one is.

Title: Re: Extra leads inside the mirror housing on the fairing
Post by: AtLarge on November 04, 2021, 05:18:31 PM

I think you nailed it with the Run n lites. When i took off the other one it still had the bulb holder like on that website. Bulb was black so obviously burned out which is why I had not noticed before. Thanks Frank. :-)