MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: Keleven on November 02, 2021, 11:45:56 PM

Title: Can't figure these connectors
Post by: Keleven on November 02, 2021, 11:45:56 PM

I need help figuring these connectors and where they go:

1995 K1100LT

I disconnected during conversion and labels have disappeared on me

Title: Re: Can't figure these connectors
Post by: jweaverak on March 21, 2022, 12:39:37 AM

The one with two yellow wires is I believe the connector that goes to your speed sensor in the rear final drive.  At least that is what it looks like on my 1985 k100

Title: Re: Can't figure these connectors
Post by: frankenduck on March 21, 2022, 12:47:49 AM

Good pics.

The first pic is connectors for the ignition coils.

The second pic is the clutch lever switch. Connects to connector with green and black/green wires.

Title: Re: Can't figure these connectors
Post by: frankenduck on March 21, 2022, 12:50:07 AM

Quote from: jweaverak on March 21, 2022, 12:39:37 AM

The one with two yellow wires is I believe the connector that goes to your speed sensor in the rear final drive.  At least that is what it looks like on my 1985 k100

Speedo sensor has brown and yellow wires. Two yellow wires is from a 61311459569 piston type switch. Like the one at the clutch lever on K1100s.

Title: Re: Can't figure these connectors
Post by: jweaverak on March 21, 2022, 07:37:49 PM

darn sorry about the misinformation! they (wires to speed sensor) are in deed yellow and brown