MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: mcgyver74 on May 07, 2021, 09:41:03 PM

Title: What tool do I need to compress these
Post by: mcgyver74 on May 07, 2021, 09:41:03 PM

So the rubber boots on the throttle body on my K75 are dry rotted and cracked so I was able to order new ones, they came with the proper clamps to tighten them down but I am not sure what tool I need to clamp these.

TIA :)

(http://www.motobrick.com/gallery/3/7328-070521213920-37311024.jpeg)

Title: Re: What tool do I need to compress these
Post by: The Mighty Gryphon on May 07, 2021, 09:56:54 PM

https://shop.greatfermentations.com/product/oetiker-clamp-crimper/homebrew-kegging?msclkid=59644ed34fd61989d04c2e46a07c8afe&utm_source=bing&utm_medium=cpc&utm_campaign=SHO-All%20Products&utm_term=1100910241411&utm_content=SHO-All%20Products

Title: Re: What tool do I need to compress these
Post by: Laitch on May 07, 2021, 10:05:52 PM

I used one of these because I had one.  :laughing4-giggles:
 [ Invalid Attachment ]

Title: Re: What tool do I need to compress these
Post by: K1300S on May 07, 2021, 10:33:10 PM

https://www.amazon.com/Lisle-30800-Boot-Clamp-Pliers/dp/B0002SREPY/ref=asc_df_B0002SREPY/?tag=hyprod-20&linkCode=df0&hvadid=312634019511&hvpos=&hvnetw=g&hvrand=10638369683774891981&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9008187&hvtargid=pla-448876485293&psc=1

Title: Re: What tool do I need to compress these
Post by: stokester on May 08, 2021, 03:07:46 PM

Known as Oetiker pincer/clamps/crimper/pliers which also are needed if replacing fuel line clamps with original Oetiker.

Title: Re: What tool do I need to compress these
Post by: Ingo on May 11, 2021, 12:12:43 AM

Quote from: Laitch on May 07, 2021, 10:05:52 PM

I used one of these because I had one.  :laughing4-giggles:

Screen Shot 2021-05-07 at 10.02.47 PM.png (22.36 kB . 155x314 - viewed 372 times)

I done used those , also...  Worked