MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: pinhead on March 04, 2021, 01:26:44 PM

Title: Increased height on windshield for 1985 K100RT
Post by: pinhead on March 04, 2021, 01:26:44 PM

I need a higher windshield or a product I could attach to extend the height of my stock windshield.  Any recommendations?  thanks!

Title: Re: Increased height on windshield for 1985 K100RT
Post by: The Mighty Gryphon on March 04, 2021, 02:47:10 PM

http://parabellum.com/K100RT-LT-K75RT-Windshield-System-P4.aspx

Title: Re: Increased height on windshield for 1985 K100RT
Post by: mw074 on March 04, 2021, 03:23:23 PM

 I have had success using a Laminar Lip. Inexpensive and easy to install.

 https://www.laminarlip.com

Title: Re: Increased height on windshield for 1985 K100RT
Post by: daveson on March 04, 2021, 06:35:26 PM

In the "project classic motobricks" section, is a thread, "taller windscreen, less wind noise" at the moment it's about half way down page two.

Title: Re: Increased height on windshield for 1985 K100RT
Post by: pinhead on March 06, 2021, 04:28:43 AM

thanks for the input!  I will check these suggestions out.