MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Blue85 on November 12, 2020, 11:28:28 AM

Title: Need to raise brake pedal 1” any ideas?
Post by: Blue85 on November 12, 2020, 11:28:28 AM

Ok my k100rs rear brake pedal way low for me.i cant push my foot down need it flush with the footpeg any ideas?

Title: Re: Need to raise brake pedal 1” any ideas?
Post by: Chaos on November 12, 2020, 01:05:20 PM

First, make sure there is not air in the system and the reservoir is full.  My Ural had a similar issue with it's mechanical drum brakes, solve it by finding a rubber pedal cover the proper size. Might not raise it a whole inch but every little bit helps.
 

Title: Re: Need to raise brake pedal 1” any ideas?
Post by: rbm on November 12, 2020, 09:12:08 PM

Saw and re-weld the brake pedal arm??  Glue on a hockey puck?

Title: Re: Need to raise brake pedal 1” any ideas?
Post by: Blue85 on November 12, 2020, 09:16:59 PM

The bmw brake is set up and functioning as it should.i think i might epoxy a riser on top of it..can remove if needed