MOTOBRICK.COM

MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: Andy FitzGibbon on July 25, 2020, 10:33:17 AM

Title: FS 22 liter top case project
Post by: Andy FitzGibbon on July 25, 2020, 10:33:17 AM

There's enough here to make a 100% functional top case, with a little work. This was mounted on my GS when I got it, using some homemade brackets. The lid has been painted a color very close to Marrakesh red, and the mounting plate has a few extra holes from the GS mounting. All still fully functional.

The hinge plate is breaking out of the lower box half at a couple rivets, and the lock cylinder is removed from the latch (but is included). The latch works fine without the lock cylinder... you could leave it out, reinstall it with no plates, or play around with filing or replacing the plates to key it to your bike's ignition.

How about $40 plus shipping?

Thanks,
Andy

Title: Re: FS 22 liter top case project
Post by: FlatSix on July 25, 2020, 11:02:56 AM

PM sent.

Title: Re: FS 22 liter top case project
Post by: Chaos on July 25, 2020, 07:52:51 PM

That mounting plate is worth the price of admission!

Title: Re: FS 22 liter top case project
Post by: Andy FitzGibbon on July 26, 2020, 11:56:04 AM

Quote from: FlatSix on July 25, 2020, 11:02:56 AM

PM sent.

Did not receive PM, if you sent one.

Title: Re: FS 22 liter top case project
Post by: FlatSix on July 26, 2020, 07:32:37 PM

Tried again...

Title: Re: FS 22 liter top case project
Post by: Andy FitzGibbon on July 27, 2020, 05:37:13 AM

Sold.