MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: DR_supra on May 19, 2020, 02:58:26 PM
-
hey guys,
im new here and just bought my first bmw k series, dont know if is the good section
my last project was a cb750 took 2 years to build
was looking for a k100 or r100 but this k1 was really close to my area and bought it right away.
the bike was in storage for 5 years, my goal this season is to put it back on the road, master cylinder is stuck, battery dead, fuel pump dead, tank need to be clean, big tune up and I need to pass the safety because the bike was in storage more than 1 year.
At the beginning I wanted to do a cafe racer build but I read a lot and its kinda sad to destroy de bike, they only made 7000 copy, well will see what im gonna do with it
the exterior is in rough condition, the 2 side fairing are crack, not the original seat (I think), I think the previous owner use rattle can,
like I said dont know what I gonna do with it, do you know guys the value of this beast in mint condition?
my last build
(https://imgur.com/eOB04dZ)
heres my k1
(https://imgur.com/qjklWzn)
(https://imgur.com/sxDdr8j)
(https://imgur.com/FjtgA5A)
(https://imgur.com/AY0HTSy)
(https://imgur.com/vSF95df)
(https://imgur.com/EIstN0S)
order fuel pump and aster cylinder still waiting
inside the tank
(https://imgur.com/tQpMkRj)
(https://imgur.com/Hf71bm0)
(https://imgur.com/0sM2Ffg)
(https://imgur.com/356EKRu)
cleaning process
(https://imgur.com/G52nCcx)
(https://imgur.com/bbs8kbS)
(https://imgur.com/BNmufXM)
(https://imgur.com/iR2W3z1)
master cylinder stuck
(https://imgur.com/3arVZ7t)
finaly remove it was not easy
(https://imgur.com/X4blfef)
this is it so far keep you update when I received my part
see yaaa
-
hey guys,
im new here and just bought my first bmw k series, dont know if is the good section
my last project was a cb750 took 2 years to build
was looking for a k100 or r100 but this k1 was really close to my area and bought it right away.
the bike was in storage for 5 years, my goal this season is to put it back on the road, master cylinder is stuck, battery dead, fuel pump dead, tank need to be clean, big tune up and I need to pass the safety because the bike was in storage more than 1 year.
At the beginning I wanted to do a cafe racer build but I read a lot and its kinda sad to destroy de bike, they only made 7000 copy, well will see what im gonna do with it
the exterior is in rough condition, the 2 side fairing are crack, not the original seat (I think), I think the previous owner use rattle can,
like I said dont know what I gonna do with it, do you know guys the value of this beast in mint condition?
my last build
(https://www.motobrick.com/gallery/3/6971-190520151927-32191369.jpeg)
heres my k1
(https://imgur.com/qjklWzn)
(https://imgur.com/sxDdr8j)
(https://imgur.com/FjtgA5A)
(https://imgur.com/AY0HTSy)
(https://imgur.com/vSF95df)
(https://imgur.com/EIstN0S)
order fuel pump and aster cylinder still waiting
inside the tank
(https://imgur.com/tQpMkRj)
(https://imgur.com/Hf71bm0)
(https://imgur.com/0sM2Ffg)
(https://imgur.com/356EKRu)
cleaning process
(https://imgur.com/G52nCcx)
(https://imgur.com/bbs8kbS)
(https://imgur.com/BNmufXM)
(https://imgur.com/iR2W3z1)
master cylinder stuck
(https://imgur.com/3arVZ7t)
finaly remove it was not easy
(https://imgur.com/X4blfef)
this is it so far keep you update when I received my part
see yaaa
-
If the fairing is repairable and but not choice, that bad boy needs a holographic vinyl wrap.
(https://images-na.ssl-images-amazon.com/images/I/61tCAc2y3VL._AC_SL1200_.jpg)
and maybe some interior lights that illuminate the engine/frame where it peaks out behind the fairing.