MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: sr20clubbie on March 18, 2020, 08:35:47 AM

Title: K1100lt brat tracker
Post by: sr20clubbie on March 18, 2020, 08:35:47 AM

Hey there fellow brickies, I'm new here and this is my first post. I am in the process of stripping down the K1100 bike and started removing bits of the wiring harnesses and as I'm going through the wiring diagrams I noticed that the bikes brain is different from the K100s, so has anyone here used the MotoGadget m unit in a K1100 build with the motronic unit. If so do you have a wiring diagram. This build has been done successfully with the Bep 3.0 and a Russian company has used the MotoGadget but there's not a lot of detail on wiring it up.

Cheers Paul 

Title: Re: K1100lt brat tracker
Post by: johnny on March 18, 2020, 08:39:33 AM

greetings...

poast some photos of your k1100...

j o

Title: Re: K1100lt brat tracker
Post by: sr20clubbie on March 20, 2020, 07:37:14 AM

No worries, where do I Post them?

Title: Re: K1100lt brat tracker
Post by: johnny on March 20, 2020, 11:10:59 AM

poast them right hear...

Title: Re: K1100lt brat tracker
Post by: sr20clubbie on March 21, 2020, 09:28:03 PM

My K1100 build in the process of removing everything then get frame powder coated. [ Invalid Attachment ]

Title: Re: K1100lt brat tracker
Post by: sr20clubbie on March 21, 2020, 09:29:47 PM

And another pic

Title: Re: K1100lt brat tracker
Post by: Laitch on March 22, 2020, 08:01:13 PM

The orange and black carry handle is a great idea.  :laughing4-giggles:

Good luck with your project. Keep posting photos of it.