MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: DavidATL on August 23, 2019, 08:53:07 AM

Title: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: DavidATL on August 23, 2019, 08:53:07 AM

This is may be almost as divisive as "what oil/ viscosity do you use?"  and certainly as flame-worthy. So please don't.

Anyone actually USE or TEST these?

https://pulse-jetignition.co.uk

https://www.motorworks.co.uk/vlive/Shop/Parts.php?T=6&Q=ELA01263
Title: Re: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: johnny on August 23, 2019, 08:57:46 AM
greetings...

there were several pashnit forum west coast members who had those things... they raved 100% positive back then...

that forum is down forever so no archive to look up those threads...

good luck with your whackness...

j o
Title: Re: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: DavidATL on August 23, 2019, 09:10:36 AM


yes, this is serious whackness
Title: Re: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: blackie1 on August 24, 2019, 02:11:05 AM
please trial some and report back
Title: Re: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: Laitch on August 24, 2019, 06:02:59 AM
If it's flame-worthy then it should be flamed.

What's keeping you from being an adopter, David? Cost or fear? No pioneer spirit or sense of dedication to your cohort? It isn't like the Internet is depriving us of information.
Title: Re: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: johnny on August 25, 2019, 08:58:41 AM
greetings...

i have decided to place an order for 8 of these units...

the powerstroke in my f-550 isnt running as clean as it did 200 thou ago... im thinking these will help with that... and the more donkeypower and the more miles per gallon is gonna be bonus...

so i pinged them... we have a trial set on the way to the motobrick garage... we can pass them around for proper beta field testing...here is the reply...

j o


Hi Johnny,

The PJI14LR doesn't fit the 2 or 4v K's due to the spark plug thread diameter, however we have just completed development of a 12mm version specifically for the in line K series, ie 75, 100 & 1100's. The production version will be available from 1st sept however if you wish to trial a set, I have a set that we have used on the Dyno for testing which I can send you for your appraisal along with the test data,  Dyno charts, emissions, fuel options etc.

Let me know if you want to try a set and your address, also the spec of the bike and any engine related modifications.

Regards,

Steve

(http://www.motobrick.com/gallery/2/1-030419165307-20761879.gif)
Title: Re: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: DavidATL on August 25, 2019, 10:29:41 AM
greetings...

so i pinged them... we have a trial set on the way to the motobrick garage... we can pass them around for proper beta field testing...here is the reply...

j o


...


Johnny - you d'man! 



D
Title: Re: Scriminger pulse-jet ignition PJI - I know, I know... .
Post by: johnny on November 26, 2019, 05:23:59 PM
greetings...


* Screenshot_20191203-055237.jpg (20.98 kB . 768x376 - viewed 495 times)

as i sitts here with my life playing out over and over in my head... i come to realization that i did not poast up the initial findings and the final conclusion of my investigation of these remarkable devices...

snapped this...


* jetpule96k1100rs.jpg (11.83 kB . 324x576 - viewed 531 times)

moar power and moar miles per gallon and moar later...

j o