MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: alabrew on July 20, 2019, 05:02:52 PM

Title: 4 pin/fuel sending unit gasket
Post by: alabrew on July 20, 2019, 05:02:52 PM

Looking for a replacement gasket to the 4 pin/fuel sending unit on the '85 (build date 8/84). Took it off to get the tank painted and noticed the Cylmer states the the gasket MUST be replaced but I can't find one on the Max fiche. Anyone gots a part number?

Also, just to double check, the return nipple had the check ball and spring, but they were both pretty much falling apart, so I removed it - no issues, correct? No sealant on these threads?

Just as a comment, I found the fuel filter was rattling, glad I bought a napa gold to replace it.

Title: Re: 4 pin/fuel sending unit gasket
Post by: johnny on July 20, 2019, 08:13:39 PM

greetings...

is it #11 on this fische... or is it missing here too...


Screenshot_20190720-191000.jpg (33.56 kB . 404x576 - viewed 447 times)


Screenshot_20190720-192420.jpg (26.33 kB . 617x576 - viewed 410 times)


Screenshot_20190720-191043.jpg (25.55 kB . 324x576 - viewed 398 times)


Screenshot_20190720-192757.jpg (50.66 kB . 351x576 - viewed 415 times)

j o

Title: Re: 4 pin/fuel sending unit gasket
Post by: Laitch on July 20, 2019, 11:00:32 PM

Quote from: johnny on July 20, 2019, 08:13:39 PM

is it #11 on this fische... or is it...

... this one at the red arrow in Diagram #16_0238?
(http://www.motobrick.com/gallery/2/1601-200719225631.png)

(http://www.motobrick.com/gallery/2/1601-200719225724.png)

Title: Re: 4 pin/fuel sending unit gasket
Post by: alabrew on July 23, 2019, 03:23:50 PM

Thanks folks. Silly me for only looking at the fiche of the gas tank and not how the tank mounts.

Laitch got it. I had bought the o-ring Johnny shows from another bricker, and was WAY too big. Should work on the '91.