MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: Kpreston on April 21, 2019, 11:52:13 AM

Title: Universal Speedo 3 pin connector to single OEM speed sensor
Post by: Kpreston on April 21, 2019, 11:52:13 AM

I am trying to connect a universal LCD digital speedo (Chinese/eBay type) to my 1986 K75C using a BEP 3.0 box.  It comes with the 3 pin connector for the speed sensor/magnet to the front wheel but I would prefer to use the OEM connector via the SPD port on the BEP 3.0 box.  How do you go from the 3 pin connector to the single OEM speed sensor?  Is there an easy solution to this?  Everything else on the speedo works fine (except fuel gauge which I will sort out another time) but I can’t seem to find any specific reference to the 3 pin speed sensor on the forums.  Thx

Title: Re: Universal Speedo 3 pin connector to single OEM speed sensor
Post by: ^Adrninistrator on April 21, 2019, 12:07:44 PM

Click here. (http://www.motobrick.com/index.php/topic,3995.0.html)

Click here. (http://www.motobrick.com/index.php/topic,9737.0.html)

Title: Re: Universal Speedo 3 pin connector to single OEM speed sensor
Post by: rbm on April 21, 2019, 03:28:51 PM

And this (http://www.motobrick.com/index.php/topic,11148.msg109089.html#msg109089)

And this (http://www.k100-forum.com/t14832-bep-3-0-installation-questions#174360)

Title: Re: Universal Speedo 3 pin connector to single OEM speed sensor
Post by: Kpreston on April 21, 2019, 09:22:55 PM

Thanks