Post by: neratzoulis on April 13, 2019, 09:00:05 AM
This is my first attempt to make a cafe racer and bought a bmw K100RS 92’ for building but I need assistance with the wiring I want to replace the stock handlebar switches so I bought the m-unit blue to change also the wire harness and the bep to replace the tachometer but my problem is I can’t find a wiring diagram for this model cause it has the matronic control unit and I am stuck. I found plenty diagrams for older models but nothing for one with matronic...
Can you give me some advice how to connect the matronic system to the m-unit?
Post by: Laitch on April 13, 2019, 09:24:41 AM
Post by: neratzoulis on April 13, 2019, 09:39:53 AM
Post by: neratzoulis on April 13, 2019, 10:11:43 AM
Yes i noticed it too and I have already replaced all the oil in the bike since I bought it but that picture is the first I took that was before I ride it to my garage..20190413_090342.jpg (22.96 kB . 364x576 - viewed 12 times)
Post by: neratzoulis on April 13, 2019, 10:16:25 AM
greetings...
where is the rs fairing...
j o
With the previous owner since he wanted almost 1500 euro more and I didn’t want to bother with selling it...
Post by: Laitch on April 13, 2019, 11:43:37 AM
. . . my problem is I can’t find a wiring diagram for this model cause it has the matronic control unit and I am stuck. I found plenty diagrams for older models but nothing for one with matronic...Another problem is that you haven't navigated around the site enough. Electrical diagrams can be found in the Motorbrick Technical Directory. That is where I found this one (http://www.motobrick.com/index.php/topic,4927.0.html).
Post by: Laitch on April 13, 2019, 12:28:03 PM
I bought the m-unit blue to change also the wire harness and the bep to replace the tachometer . . .This is a video showing m-unit replacement on a K1100 which also uses a Motronic management system similar to your moto's. You'll likely be getting more advice about this procedure here but searching the site should uncover additional information.
Can you give me some advice how to connect the matronic system to the m-unit?
https://www.youtube.com/watch?v=Tv-VI3WRYzM
Post by: neratzoulis on April 13, 2019, 01:34:38 PM
Another problem is that you haven't navigated around the site enough. Electrical diagrams can be found in the Motorbrick Technical Directory. That is where I found this one (http://www.motobrick.com/index.php/topic,4927.0.html).Maybe I was not clear on my original post I meant that I can’t find a wiring diagram for the m-unit connected to my specific model i already have this wiring diagram but unfortunately my electric skills are the worst than everything but from the video you send me the only I manage to understand is that what ever needs power I can pass the relay and connect it to the m-unit directly if I am correct...
Post by: neratzoulis on April 13, 2019, 01:49:14 PM
greetings...
did you call motogadget and ask them...
j o
I thought they just provide the equipment and thats all... but I will do that immediately.!
Post by: neratzoulis on April 13, 2019, 01:57:04 PM
greetings...
when did equipment providers stop providing the tech for their equipments proper operation...
and when did buyers of said equipment stop doing their own doo dillergence before buying the equipment...
j o
Well usual when you provide an equipment that is vastly supported from many different manufacturers and models you provide just a general diagram and leave the rest to the consumer...
Post by: johnny on April 13, 2019, 02:12:19 PM
did you call marulabs...
j o
Post by: Laitch on April 13, 2019, 02:21:38 PM
Well usual when you provide an equipment that is vastly supported from many different manufacturers and models you provide just a general diagram ...Are you looking for diagrams from Motogadget, from Marulabs, or both?
Post by: neratzoulis on April 14, 2019, 12:48:23 AM
greetings...
did you call marulabs...
j o
No cause my problem for now at least is not the bep but the m-unit wiring. Do you think they will be able to assist me ?!
Are you looking for diagrams from Motogadget, from Marulabs, or both?
I am looking a wiring diagram for the m-unit how to be connected with my specific K100RS Ed or someone who can give me some guidance on how to connect it due to tha all the wiring diagrams are for older K’s and not have a motronic control unit.
Post by: Laitch on April 14, 2019, 06:51:24 AM
all the wiring diagrams are for older K’s and not have a motronic control unit.The wiring diagram in the link of Post#5 of the this thread is of a 4V K100RS with a Motronic. What type of instructions came with the m-unit?
There are many members who have worked with the m-unit with varying degrees of success. Click this link (https://www.google.com/search?q=m-unit+site%3Amotobrick.com&ie=utf-8&oe=utf-8&client=firefox-b-ab) then scroll down for links to threads discussing the challenges. You could send a personal message to those members whose work interests you. The thread titled The Khan . . . is working on a moto with a Motronic but whether the electronic fuel injection control is Motronic or Jetronic, the installation seems similar.