MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: stokester on April 12, 2019, 07:52:19 PM
-
I purchased a kit of connectors to replace my fuel pump 4-pin connector (thanks to a link from a fellow motobricker) which has 10 kits. So I have six to donate.
https://www.amazon.com/gp/product/B01FU6BBG0/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B01FU6BBG0/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1)
Therefore I will send you a kit as shown below which includes the each side of the connector, both male and female terminals and seals for a donation of at least $10 to the Motobrick site. Just send me a private message with your address with some confirmation of your donation and I will send it to you in a padded envelope.
-
you'll want one of these to do a kick ass job https://www.ebay.com/itm/IWISS-SN-2549-Crimping-Tools-for-AWG28-18-XH2-54-Dupont-2-54-2-8-3-0-3-96-4-8/332493237474?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
-
OK - I will send two connector sets as shown above for a contribution to the Motobrick site. There is always a chance of a mistake in crimping.
UPDATE: 22 Apr 2020
Have to update the offer to one set because of new interest.
-
Sent you a PM Monday that I can't find in my messages, is the offer still open?
-
I will take one.
-
Sent you a PM Monday that I can't find in my messages, is the offer still open?
On its way, check your spam filter.
I apologize that I offered two and only sent one. If you have any difficulties or need another one let me know.
-
All connector kits are spoken for.
-
On its way, check your spam filter.
I apologize that I offered two and only sent one. If you have any difficulties or need another one let me know.
Not a problem, I will take my time working with it.
Thanks!
-
Just further on 4-pin connector replacements -- what is the fan favourite now adays?
It seems as though a few years ago Johnny and others had suggested basic trailer connectors. Have we moved on from that? Is there a Motobrick approved option that has become more or less universal?
I've had a few random "cut outs"/stalls as of late that seem to suggest the issue is the 4-pin.
-
Just about any sealed connector (Deutsh, WeatherPack, etc) that will fit should work, such as the one linked in post 1 above. Many auto parts stores here in the Midwest stock parts to make up connectors as well but are greatly more expensive than ordering them from somewhere. My local NAPA store will even sell me one with wire pigtails in place to splice onto existing wires...for about $30 each.
Mouser, Del City, TE.com, Eastern Beaver and others sell them at reasonable costs. eastern Beaver has a nice tutorial on using the crimper he sells as well.
-
Easter Beaver Sumitomo TS090 Sealed Connectors (http://easternbeaver.com/Main/Elec__Products/Connectors/Sealed/SMTS/smts.html)
the 'Sumitomo Not in Catalog Male 4P Connector' 3/4 of the page down sleek discreet connector
get extra pins and seals
(http://www.motobrick.com/gallery/3/5332-300420112339-3145709.jpeg)
(http://www.motobrick.com/gallery/3/5332-300420112359-31471513.jpeg)
-
Easter Beaver Sumitomo TS090 Sealed Connectors (http://easternbeaver.com/Main/Elec__Products/Connectors/Sealed/SMTS/smts.html)
the 'Sumitomo Not in Catalog Male 4P Connector' 3/4 of the page down sleek discreet connector
get extra pins and seals
(http://www.motobrick.com/gallery/3/5332-300420112339-3145709.jpeg)
(http://www.motobrick.com/gallery/3/5332-300420112359-31471513.jpeg)
That's the one I used, easy enough.