MOTOBRICK.COM

MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: johnclaude on October 24, 2018, 11:12:19 PM

Title: WTB K75 Gauges
Post by: johnclaude on October 24, 2018, 11:12:19 PM

Hi Guys,

My wife and I were replacing the odometer gears in my 1988 K75C when she got a little aggressive and snapped/bent the speedometer needle. Anyone have any ideas? Or a set of gauges they have laying around? I tried for an hour to get the needle back in straight, but no dice : (

(http://www.motobrick.com/gallery/1/6107-241018230827.jpeg)
(http://www.motobrick.com/gallery/1/6107-241018230802.jpeg)

Title: Re: WTB K75 Gauges
Post by: CNRED on October 25, 2018, 09:00:30 AM

I've got a set from a 94 k75.  works excellently.  $75.00 plus shipping.


fullsizeoutput_5f1.jpeg (52.83 kB . 768x576 - viewed 397 times)

Title: Re: WTB K75 Gauges
Post by: bocutter Ed on October 25, 2018, 11:10:11 AM

I think I have that bit from my parts meter (I have a good spare cluster and another is bits-in-a-bag). Just shipping if I have it ...

Title: Re: WTB K75 Gauges
Post by: bocutter Ed on October 27, 2018, 11:33:45 AM

This is the bits-in-a-bag motometer. It's what's left over from merging good parts from a US (in-miles) into my in-Kilometers cluster. My original cluster had a corroded loom, as can be seen, and I'd jumpered a connection so the tach would function.

I think when you took the needle from yours the small shaft broke off, so it is stuffed.

 [ Invalid Attachment ]

 [ Invalid Attachment ]

Title: Re: WTB K75 Gauges
Post by: johnclaude on October 28, 2018, 11:01:09 PM

I have a instrument cluster on the way, thanks for the replies everyone!