MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: mophead on September 13, 2018, 01:52:12 PM
-
Are these the same size as for a K1100RS?
https://www.ebay.com/itm/New-Ducati-Brembo-FULL-FLOATING-Buttons-Set-for-Front-Brake-Rotors-Discs/332774885143?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
-
According to the compatibility chart at the bottom of the page you sent they are not compatible.
However Motobins does sell them https://www.motobins.co.uk/ (https://www.motobins.co.uk/) part code 20393 they charge 28.50 pounds sterling which is slightly cheaper than the ones you found but the shipping will be quite steep.
-
Only $11.80 to ship. Thanks for the tip. On their way.
-
Saw these the other day.
https://boxer-upgrades.webs.com/apps/webstore/products/show/3821625
-
Gryph,
Thanks for the link but already bought the Motobins. If they wear out the rotors it will probably be long after I am gone.
-
Just looked at mine on the '91 while topping up the tire this morning. Several are pretty mangled so I ordered a set from the boxer-upgrade site TMG posted about. We will see how it goes. It honored the $69 price and no shipping cost was added. Forgot to add on some .01 crush washers and oil fill o-rings though.
-
Rotor buttons received from boxer-upgrades. Shipped usps from Romania with signature required. Ordered on 9/13, received 10/2. No communication from the seller and I was about to contest the paypal charge when it finally arrived. Unable to attach picture fro some reason.