MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Gru on July 24, 2018, 11:36:45 AM

Title: Radial on K75
Post by: Gru on July 24, 2018, 11:36:45 AM

I have a K75, 1995, with 3.0 tear three spoke wheel. I want to put a 15/70/17 rear wheel on, has a shim in the wheel, but the radial  is 11mm wider than the stock bias tire. will it work, or will I have to add another shim.

Title: Re: Radial on K75
Post by: johnny on July 24, 2018, 03:58:15 PM

greetings...

i went 3 spacers with no adverse effects no tior rubb no off tracking whack...

all these things are tweaked... frames swingarm bushings wheels... gonna have to mess with it...

i can tell you to check tior rubb while the tiors are hot and loaded...

j o

Title: Re: Radial on K75
Post by: rbm on July 24, 2018, 05:50:12 PM

Too much shimming and you'll scrape the centre stand on the other side. 

Title: Re: Radial on K75
Post by: Gru on August 02, 2018, 10:06:29 PM

The shims are closer to 1.3mm, hope three will be enough. Tires ordered, shims waiting to have some fun getting things lined up.👍