MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: lilau3 on March 08, 2018, 06:50:03 AM

Title: Ignition Switch Relocation
Post by: lilau3 on March 08, 2018, 06:50:03 AM
Today I moved the ignition switch to the electrical box. 3D printed a new switch housing to hold it all together.

(https://uploads.tapatalk-cdn.com/20180308/e00aba926b14fcab1a016df1b07ec655.jpg)

(https://uploads.tapatalk-cdn.com/20180308/c057a5c3f1101d8ee3cba0ae16936c62.jpg)

(https://uploads.tapatalk-cdn.com/20180308/6b23551f2c478874d14fe915dff73686.jpg)

(https://uploads.tapatalk-cdn.com/20180308/84e69721538587d4b741f00b248a40a8.jpg)

(https://uploads.tapatalk-cdn.com/20180308/ce8554806a20bf6af6841ca6ffd5a470.jpg)


Sent from my iPhone using Tapatalk
Title: Re: Ignition Switch Relocation
Post by: Laitch on March 08, 2018, 10:12:29 AM
That's a tidy assembly. How readily will it be accessed if the bike stalls? Will you not be installing a battery cover, is it accessible with the cover installed, or have you made some other accommodation for access?
Title: Re: Ignition Switch Relocation
Post by: andylok on December 29, 2018, 11:51:44 PM
Quote from: lilau3 on March 08, 2018, 06:50:03 AM
Today I moved the ignition switch to the electrical box. 3D printed a new switch housing to hold it all together.

(https://uploads.tapatalk-cdn.com/20180308/e00aba926b14fcab1a016df1b07ec655.jpg)

(https://uploads.tapatalk-cdn.com/20180308/c057a5c3f1101d8ee3cba0ae16936c62.jpg)

(https://uploads.tapatalk-cdn.com/20180308/6b23551f2c478874d14fe915dff73686.jpg)

(https://uploads.tapatalk-cdn.com/20180308/84e69721538587d4b741f00b248a40a8.jpg)

(https://uploads.tapatalk-cdn.com/20180308/ce8554806a20bf6af6841ca6ffd5a470.jpg)


Sent from my iPhone using Tapatalk

I love this ignition switch housing idea.
I was wondering, if I can buy one from you?
Title: Re: Ignition Switch Relocation
Post by: -mek- on January 02, 2019, 12:54:06 PM
Or could you share the file for printing?
Title: Re: Ignition Switch Relocation
Post by: k100m on April 03, 2019, 03:04:52 AM
Quote from: lilau3 on March 08, 2018, 06:50:03 AM
Today I moved the ignition switch to the electrical box. 3D printed a new switch housing to hold it all together.

(https://uploads.tapatalk-cdn.com/20180308/e00aba926b14fcab1a016df1b07ec655.jpg)

(https://uploads.tapatalk-cdn.com/20180308/c057a5c3f1101d8ee3cba0ae16936c62.jpg)

(https://uploads.tapatalk-cdn.com/20180308/6b23551f2c478874d14fe915dff73686.jpg)

(https://uploads.tapatalk-cdn.com/20180308/84e69721538587d4b741f00b248a40a8.jpg)

(https://uploads.tapatalk-cdn.com/20180308/ce8554806a20bf6af6841ca6ffd5a470.jpg)


Sent from my iPhone using Tapatalk

Hi, I came here just for this. I am sure you get this request often.

Is it possible to share the 3d printing file? For me it would mean a gread addition to K100 I'm putting together.

Thank you and kind regards.
Title: Re: Ignition Switch Relocation
Post by: DJEwen on April 03, 2019, 08:32:30 AM
Tidy work but it looks unfinished, will you be making a bezel for the face?