MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: pat7762 on February 08, 2018, 07:01:03 PM
-
hi everyone, i just bought a GS-911 for my 96 K1100LT. i installed the software and connected it to my bike, as soon as i try to check for codes in the PCM i get a box that pops up that says "an unhandled exception occurred". i was able to connect to ABS and check for codes. anyone have any ideas? i did send off an email to there support.
-
Is the GS-911 compatible with the K1100LT?
-
yeah, http://www.twistedthrottle.com/hexcode-gs911-3-pin-interface
Compatible with the following BMW Motorcycles:[/size]BMW R1100GS
[/color]- BMW R850GS (with 3-pin port)
- BMW R850RT (with 3-pin port)
- [/size]Please Note: This unit is for use on BMW Motorcycles using a flat 3 pin diagnostic connector only[/color]
-
the software shows that the IGN is off, and there is batt voltage at pin 1. From what i can find the tool picks up Voltage at pin 1, maybe defective tool? :dunno2:
-
What computer OS system are you using....
-
windows 7 PRO
-
got this email this morning. It works now.
[font=Segoe UI Web (West European)]| Hi Patrick,[/font][font=Segoe UI Web (West European)][/size]| | Upon release of the latest software we found a bug which we already identified and resolved.| | In the meantime, you are welcome to download a previous version of the GS-911 PC app which should still enable you to check the engine controller:| | https://dl.dropboxusercontent.com/s/vii0xr49138db9n/GS-911-1703.1.exe (https://dl.dropboxusercontent.com/s/vii0xr49138db9n/GS-911-1703.1.exe)| | Let me know if this does not work for you.| | Kind regards,| Mornay`---[/font]
-
guess that copy and past didnt work, but anyways they said there was a bug in the new up date and they gave me a link to an older version and now it works
-
Good to hear.