MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: luman1991 on December 12, 2017, 04:01:53 AM

Title: Fit k1200rs wheels to k100
Post by: luman1991 on December 12, 2017, 04:01:53 AM

Hello,


Is k 1200rs back wheels fit to k 100 ?
or is hard to put it on ?


thanks

Title: Re: Fit k1200rs wheels to k100
Post by: luman1991 on December 14, 2017, 07:55:10 AM

why anybody reply me ?

Title: Re: Fit k1200rs wheels to k100
Post by: Martin on December 14, 2017, 03:22:59 PM

I  believe it has been done. However I believe a bit of modification is required, I will post any information I find.
Regards Martin.

Title: Re: Fit k1200rs wheels to k100
Post by: The Mighty Gryphon on December 14, 2017, 10:54:03 PM

Here's a discussion on another forum.  Apparantly K1200 rear wheels only work with Paralever rear ends and a custom axle and different wheel bearings are needed on the front.  You will also need K1100 forks and different calipers to work with the larger diameter discs.

http://www.k100-forum.com/t9326-five-spoke-k12-wheels-on-a-k11-k100-k75

Title: Re: Fit k1200rs wheels to k100
Post by: luman1991 on December 15, 2017, 02:21:47 AM

thanks, i have a back wheel, i think i need only a offset right and past it ?

Title: Re: Fit k1200rs wheels to k100
Post by: rbm on December 15, 2017, 09:12:10 PM

Download this document and read it:  https://drive.google.com/open?id=0B3UPbNZRyr1reDNoZFZPcGlHa00