MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: notalec on August 09, 2017, 06:58:04 PM

Title: Throttle body synching issues
Post by: notalec on August 09, 2017, 06:58:04 PM

So I think I may have screwed up.


I bought a 92 k75, my first fuel injected bike. I am very familiar with carbs, but this is my first go at a modern bike. It starts and idles great, a little high, about 1050. But at anything past 3500 is feels really weak. I was told to sync the throttle bodies. I accidentally synced the butterfly valves instead of the air mixture screws. I was just informed those are set from the factory and should not be messed with. IS there a procedure to get those back to where they should be so I can do a proper sync?

Title: Re: Throttle body synching issues
Post by: Filmcamera on August 09, 2017, 07:18:58 PM

Here this might help

http://www.k100-forum.com/t1526-how-to-balance-the-throttle-bodies-solved (http://www.k100-forum.com/t1526-how-to-balance-the-throttle-bodies-solved)