MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Enfield on July 19, 2017, 01:38:24 AM

Title: Brembo forks or?
Post by: Enfield on July 19, 2017, 01:38:24 AM

Hi. I am about to change my Sterling head bearings and fork Oil seals. I have the Haynes manual and it says  Fictel or Sachs forks from 1985 and on - mine is K100 1984... and forks are marked Brembo? Is the procedure for bearing removal the same? And am I F.U.B.A.R.. regarding Oil seals? As I Can only find one kind for the K 100?
Thanks in advance
Chr


Sent from my iPhone using Tapatalk

Title: Re: Brembo forks or?
Post by: Enfield on July 19, 2017, 01:07:12 PM

Bearings changed - as the Way Haynes describes - straightforward. Still havent done seals.


Sent from my iPhone using Tapatalk

Title: Re: Brembo forks or?
Post by: Enfield on July 21, 2017, 08:50:08 AM

Seals changed - a 10 min job when forks are off.


Sent from my iPhone using Tapatalk

Title: Re: Brembo forks or?
Post by: Martin on July 21, 2017, 06:08:24 PM

 :2thumbup: Did it all on your ownsome without any interjection. :clap: Well done regards Martin.